How to Disable TCP/IPv6 (IPv6) on Windows 11
IPv6 (Internet Protocol Version 6) is enabled by default in Windows 11. It allows your computer to communicate with other devices and internet services. However, if you experience network compatibility issues or need to troubleshoot connectivity problems, you may want to disable IPv6.
Windows 11 offers several ways to disable IPv6, including Network Adapter Settings, PowerShell, Command Prompt, and Registry Editor.
In this guide, we will explain how to disable TCP/IPv6 on Windows 11 using these methods.
Table of Contents
What Is IPv6 in Windows 11?
IPv6 stands for Internet Protocol Version 6. It is the latest version of the Internet Protocol, designed to replace IPv4 and provide a larger pool of IP addresses.
IPv4 uses 32-bit addresses, while IPv6 uses 128-bit addresses. Windows 11 supports both protocols, allowing devices to communicate over IPv4 and IPv6 networks.
Why Disable IPv6 on Windows 11?
You may want to disable IPv6 for the following reasons:
- Network troubleshooting: Identify whether IPv6 is causing connectivity problems.
- Compatibility issues: Resolve certain compatibility problems with older routers or network equipment.
- Network testing: Test applications and services that operate using IPv4.
- Configuration issues: Troubleshoot specific DNS, routing, or IPv6 configuration problems.
Note: Microsoft recommends keeping IPv6 enabled because some Windows components and applications rely on it.
How to Disable TCP/IPv6 (IPv6) on Windows 11
You can disable IPv6 on Windows 11 using the following methods.
Method 1: Disable IPv6 Using Network Adapter Settings
- Press Windows + R to open the Run dialog box.
- Type ncpa.cpl and press Enter.
- Right-click your active Wi-Fi or Ethernet connection.
- Select Properties.
- Find Internet Protocol Version 6 (TCP/IPv6).
- Uncheck the checkbox.
- Click OK to save the changes.
IPv6 binding will now be disabled for the selected network adapter.
Method 2: Disable IPv6 Using PowerShell
- Open the Start menu and search for PowerShell.
- Select Run as administrator.
- Enter the following command to view network adapters:
Get-NetAdapterBinding -ComponentID ms_tcpip6
- To disable IPv6 on your Wi-Fi adapter, execute:
Disable-NetAdapterBinding -Name “Wi-Fi” -ComponentID ms_tcpip6
- Replace Wi-Fi with your actual network adapter name if necessary.
To verify the changes, run:
Get-NetAdapterBinding -ComponentID ms_tcpip6
If the Enabled value is False, IPv6 binding is disabled on that adapter.
Method 3: Disable IPv6 Using Command Prompt
You can also disable IPv6 by modifying the Windows Registry through Command Prompt.
- Open Command Prompt as administrator.
- Enter the following command:
reg add “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters” /v DisabledComponents /t REG_DWORD /d 255 /f
Press Enter.- Wait for the success message.
- Restart your computer to apply the changes.
This command configures Windows to disable IPv6 on non-tunnel and tunnel interfaces, except the IPv6 loopback interface.
Method 4: Disable IPv6 Using Registry Editor
- Press Windows + R.
- Type regedit and press Enter.
- Navigate to the following location:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters
Find DisabledComponents in the right panel.- If it does not exist, right-click an empty area and select New > DWORD (32-bit) Value.
- Name it DisabledComponents.
- Double-click the entry.
- Select Hexadecimal.
- Set the Value data to FF.
- Click OK and restart your computer.
IPv6 will be disabled according to the selected registry configuration.
How to Re-Enable IPv6 on Windows 11
If you want to enable IPv6 again, follow the steps according to the method you previously used.
Re-Enable IPv6 Using Network Adapter Settings
- Press Windows + R and type ncpa.cpl.
- Right-click your network adapter and select Properties.
- Check Internet Protocol Version 6 (TCP/IPv6).
- Click OK.
Re-Enable IPv6 Using PowerShell
Open PowerShell as administrator and execute:
Enable-NetAdapterBinding -Name “Wi-Fi” -ComponentID ms_tcpip6
Replace Wi-Fi with your network adapter name.
Re-Enable IPv6 Using Command Prompt
Open Command Prompt as administrator and run:
reg add “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters” /v DisabledComponents /t REG_DWORD /d 0 /f
Restart your computer to apply the changes.
Re-Enable IPv6 Using Registry Editor
- Open Registry Editor.
- Navigate to:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters
Double-click DisabledComponents.- Set its value to 0.
- Click OK and restart your PC.
How to Check Whether IPv6 Is Disabled on Windows 11
You can verify the IPv6 status using PowerShell.
- Open PowerShell as administrator.
- Run the following command:
Get-NetAdapterBinding -ComponentID ms_tcpip6
- Check the Enabled column.
- True: IPv6 binding is enabled.
- False: IPv6 binding is disabled.
This command checks the IPv6 binding status of your network adapters.
Frequently Asked Questions
1. Is It Safe to Disable IPv6 on Windows 11?
Disabling IPv6 on a specific network adapter for troubleshooting is generally possible. However, Microsoft recommends keeping IPv6 enabled because some Windows components and applications depend on it.
2. Does Disabling IPv6 Improve Internet Speed?
No. Disabling IPv6 does not automatically improve internet speed. Performance depends on your internet connection, router, DNS configuration, and network settings.
3. Can I Disable IPv6 Without Disabling IPv4?
Yes. IPv4 and IPv6 are separate protocols. Disabling IPv6 does not automatically disable IPv4, so your computer can continue using IPv4.
4. Do I Need to Restart My PC After Disabling IPv6?
A restart is required when changing the DisabledComponents Registry value. Changes through Network Adapter Properties or PowerShell generally take effect without a full system restart.
5. Can I Disable IPv6 on Wi-Fi and Ethernet Separately?
Yes. Windows 11 allows you to disable IPv6 individually for Wi-Fi and Ethernet network adapters using Network Adapter Properties or PowerShell.
6. Should I Disable IPv6 on Windows 11?
You should keep IPv6 enabled unless you have a specific network compatibility issue or troubleshooting requirement. Disabling it unnecessarily may affect certain Windows features and network services.
Conclusion
Windows 11 provides multiple ways to disable TCP/IPv6, including Network Adapter Properties, PowerShell, Command Prompt, and Registry Editor. The Network Adapter Properties method is the easiest option for most users.
However, Microsoft recommends keeping IPv6 enabled unless disabling it is necessary for troubleshooting or specific network requirements.
